Technical Center
Find product documents, usage guidance, troubleshooting and WEDM technical knowledge.
Documents
Request TDS, SDS/MSDS and COA for the specific product.
Public documents currently focus on Chinese and English MSDS. TDS, COA and operating parameters are confirmed by product.
How to Use
Mixing, water quality and fluid management depend on the product label, machine and operating conditions.
01Water-Based Dielectric Usage: Dilution Ratios, Top-Up Timing, and Practical Notes→02Is Your Water-Based Wire EDM Fluid Hard-Water Tolerant?→03How Often Should You Change Wire EDM Dielectric Fluid?→
Do not determine a mixing ratio from general web guidance alone. Follow the product label or confirmed TDS and run a small trial where needed.
Troubleshooting
Start with common issues such as wire breakage, short circuit, foam, rust and unstable cutting.
Wire EDM Wire Breakage: Common Causes and Practical Fixes→Wire EDM Short Circuits: Scene-by-Scene Troubleshooting→Excessive Foam in Wire EDM Working Fluid: Four Causes and Fixes→Does Water-Based Wire EDM Fluid Cause Rust? Causes and Correct Use→Unstable Wire EDM Cutting: Eight Interference Factors and a Check Sequence→